To assemble the Extension Tube column support assembly for LC
analysis
The LC transfer line is attached to the analytical column, which is attached to
a needle assembly. The needle assembly is held in the
The
through the
the column.
Before you begin, make sure that you have:
1 If the
Nanospray Ion Source User Guide
Needle Sleeve Assembly
Nanospray Slide
•
Extension Tube
•
Tube Clamp
•
T-8 Torx screws (p/n 0515-2975)
Extension Tube
Assembly, use two
T-8 Torx screws (p/n 0515-2975)
Tube
onto the
Needle Sleeve
is inserted into the Nanospray Ion Source
Assembly. The extension tube adds support for
is not already attached to the
Assembly.
Installation
Needle Sleeve
Assembly.
Needle Sleeve
to attach the
Extension
1
27