Table of Contents
Advertisement
4
Basic Operation
Preparing the Q-TOF LC/MS
Preparing the Q-TOF LC/MS
Performing a checktune or autotune
See
Switching LC stream to MS
After you condition the column and tune the instrument, switch the LC stream
from Waste to MS. See
this.
Monitoring MS baseline and spectral displays
If you do not monitor the LC baseline with a VWD or DAD, make sure that the
instrument baseline is stable and no spectra of interfering intensity appear in the
display.
If you do monitor the LC baseline with a VWD or DAD, change back to the default
instrument displays.
1 Right-click the chromatogram plot, and click Change.
2 Select the MS signal, and click OK.
64
Chapter
3, "Tuning".
"Switch LC stream to Waste."
on page 59 for how to do
Agilent Revident LC/Q-TOF System User Guide
Advertisement
Table of Contents
