Emodule Mini Display Readout; Front Panel Instrument Status Led - Agilent Technologies 5975 MSD Operation Manual

eModule mini display readout

This section only applies to the 5977B MSD. Earlier 5975/5977 MSD models do
not have this feature.
The eModule mini display, accessible when the analyzer door cover is open,
allows the operator to view the LAN configuration of the instrument including
its IP address, subnet mask, default gateway, and MAC address. This LAN
configuration can be changed using the GC control panel or the web user
interface (WUI) from a web browser.

Front Panel Instrument Status LED

This section only applies to the 5977B MSD. Earlier 5975/5977 MSD models do
not have this feature.
Through the front panel Instrument Status LED, the operator can view the
current status of the instrument using color codes and LED on/off timing.
Table 14
Instrument Status
Ready
Acquiring data
Not ready
Not connected to DS
Ready and not connected to DS
Start up (prior to FW load)
Fault
5975/5977 Series MSD Operation Manual
Front panel Instrument Status LED codes
Operating in Electron Ionization (EI) Mode
LED code
Solid green
Blinking green (<2 sec)
Solid yellow
Blinking yellow (<2 sec)
Solid yellow for 3 sec, quick double blink
Blinking Red (<2 sec)
Solid red
3
61