Settings; Operation Principle; Single Point Generic Control 8 Signals Spc8Ggio; Identification - ABB REG650 Technical Manual

1MRK 502 048-UEN A
12.6.5
12.6.6
12.7
12.7.1
12.7.2
12.7.3
Technical manual

Settings

The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).

Operation principle

Upon receiving the input signals, the IEC 61850 generic communication I/O functions
(DPGGIO) function block will send the signals over IEC 61850-8-1 to the equipment
or system that requests these signals. To be able to get the signals, PCM600 must be
used to define which function block in which equipment or system should receive this
information.

Single point generic control 8 signals SPC8GGIO

Identification

Function description
Single point generic control 8 signals

Functionality

The Single point generic control 8 signals SPC8GGIO function block is a collection
of 8 single point commands, designed to bring in commands from REMOTE
(SCADA) to those parts of the logic configuration that do not need extensive
command receiving functionality (for example, SCSWI). In this way, simple
commands can be sent directly to the IED outputs, without confirmation. The
commands can be pulsed or steady with a settable pulse time.

Function block

SPC8GGIO
BLOCK ^OUT1
PSTO ^OUT2
^OUT3
^OUT4
^OUT5
^OUT6
^OUT7
^OUT8
IEC09000086 V1 EN
Figure 206: SPC8GGIO function block
IEC 61850
identification
SPC8GGIO
IEC09000086_1_en.vsd
Section 12
Control
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
421