Siemens HiPath 5000 Service Manual page 1150

power_calc.fm
Identifying System Power Requirements
Workpoint Clients, Key Modules and Adapter Power Requirements
Table D-13 Workpoint Clients, Key Modules and Adapter Power Requirements
optiset E entry
optiset E basic
optiset E standard
optiset E advance plus/comfort
optiset E advance conference/conference
optiset E memory
optiset E key Module
Hicom Attendant BLF
optiset E optiset E acoustic adapter
optiset E analog adapter
optiset E contact adapter
optiset E control adapters
optiset E data adapter
optiset E headset adapter
optiset E headset plus adapter
optiset E ISDN adapter
optiset E phone adapter
Analog telephone (40 mA for short trunk) in active status
1 A local power supply is used for Power over LAN (in accordance with Cisco and the pre802.3af standard) and power supply.
2 Power is provided by a local power supply.
3 A local power supply provides power to the connected analog telephone.
D-14
Workpoint Client
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Net Power Requirement in W
(from –48 V input)
0.36
0.36
0.41
0.43
0.85
0.56
0.06
2
0.0
0.02
3
0.0
0.7
0.34
0.76
0.03
0.23
0.05
0.06
0.3
P31003-H3560-S403-54-7620, 09/05