B Office Phonemail System Planner; Power Requirements; Mounting Location; Port (Storage) Expansion - Siemens Hicom Office PhoneMail Installation And System Administrator's Manual

B Office PhoneMail System Planner
This system planner must be completed before you start the installation.
Use this system planner to aid in documenting the installation requirements. Using Appendix
A, "Office PhoneMail Design Checklist", consult with the customer and complete this system
planner. Check off each step as it is completed. When the default setting is acceptable for any
parameter, circle the default value.
B.1

Power Requirements

220/110 VAC outlet within 5 feet:
B.2

Mounting Location

Use the space below to describe the Office PhoneMail mounting location. (Office PhoneMail
must be located within 5 feet of the Hicom unit.)
B.3

Port (Storage) Expansion

Install Optional Office PhoneMail Card:
B.4

Fax Expansion

Install Optional Office PhoneMail Card:
G281-0507-00, April 15, 1998
Hicom Office PhoneMail, Version 1, Installation and System Administration Guide
Office PhoneMail System Planner
Yes No
Yes No
Yes No
lleg_sa.a02
Power Requirements
B-1