Uefi Setup Menu Items (Cb 520X B1); System Configuration And Boot Management - Hitachi Compute Blade 500 Series User Manual

Save Settings
Select Save Settings and press Enter to save the new settings.
Restore Settings
Select Restore Settings and press Enter to cancel the change in settings
and to restore to the previous settings.
Load Default Settings
Select Load Default Settings and press Enter to cancel the change in
settings and to restore to the factory default settings.
Exit Setup
Select Exit Setup and press Enter to exit from the setup menu.
When the dialog to select either you want to exit setup menu or return to
setup utility appeared, press Y to exit the setup menu.
Tip: If you have unsaved changes, <Y> Save And Exit the Setup Utility is
appeared. And then press Y to save changed settings and exit.

UEFI setup menu items (CB 520X B1)

This section describes UEFI setup menu items for CB 520X B1.

System Configuration and Boot Management

Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Table 2-77 System Configuration and Boot Management menu items
Menu items
System Information
System Settings
Data and Time
Displays the basic system information, which cannot be changed.
Displays the system settings.
Displays the local date and time of the system.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
2-89