Hitachi Compute Blade 500 Series User Manual page 229

Schedule CC page: schedule consistency check setting submenu
Click Supported of Schedule CC in the Controller Properties submenu 2
window. The following window is displayed.
Note: Do not set the value of this item. This item is not supported
The following table describes menu items in the window.
Table 4-10 Schedule CC page menu items
Menu items
CC Frequency Sets the CC schedule function:
Enable or Disable
CC Start (mm/dd/ Sets on what date the
yyyy) consistency check starts.
CC Start Time Sets on what time the
consistency check starts.
CC Mode Sets if the consistency check is
executed on multiple disk
arrays.
Select VDs to Specifies a disk array on which
Execute CC the consistency check is not
executed.
Note:
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
Description Setting/display value
[Disable (invalid schedule)] /
Continuous /Hourly / Daily /
<<Weekly>> / Monthly
[01/01/2000]v / Appropriate
1
value
[12:00 AM] / <<03:00>> AM /
1
Appropriate value
[Sequential (a consistency check
per array)] /
<<Concurrent (a consistency
check on multiple arrays)>>
Choose any array configuration.
4-19