Hitachi Compute Blade 500 Series User Manual page 51

The items to be displayed may be different depending on the setting of Boot
Manager.
For the details, see
Note: When you boot from CD/DVD available in both UEFI mode and Legacy
mode, the boot may be performed in UEFI mode. To boot in Legacy mode,
follow the procedure described in
Boot Manager
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter. You can scroll the window
using the up arrow in red on the left top or the down arrow in red on the
bottom left if they are shown on the window.
Menu items
Primary Boot Sequence
Add Boot Option
Delete Boot Option
Change Boot Order
Secondary (WOL) Boot Sequence
Add WOL Boot
Option
Delete WOL Boot
Option
Change WOL Boot
Order
Boot Other
Boot From File
Boot From Device
UEFI Shell
Select Next One-
Time Boot
Boot Manager on page
Table 2-28 Boot Manager menu items
Adds a device or file system to the boot option.
See Add Boot Option sub menu on page
Deletes a device or file system from the boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page
Changes boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page
Adds a device or file system to the WOL boot option.
See Add Boot Option sub menu on page
Deletes a device or file system from the WOL boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page
Change the WOL boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page
Boots up from a file that you specify.
Boots up from a device that you specify. See
sub menu on page 2-34
Boots UEFI Shell.
Tries to boot from a specific target only on the next boot.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
2-31.
Boot From Device sub menu on page
Description
for details.
2-34.
2-32.
2-33.
2-33.
2-32.
2-33.
2-33.
Boot From Device
2-31