Hitachi Compute Blade 500 Series User Manual page 103

Table 2-73 Boot Manager menu items
Menu items
Primary Boot Sequence
Add Boot Option Adds a device or file system to the boot option.
See
Delete Boot Option Deletes a device or file system from the boot option, which is
enabled in the next boot.
See
Change Boot Order Changes boot orders, which are enabled in the next boot.
See
Secondary (WOL) Boot Sequence
Add WOL Boot Adds a device or file system to the WOL boot option.
Option
See
Delete WOL Boot Deletes a device or file system from the WOL boot option, which is
Option enabled in the next boot.
See
Change WOL Boot Change the WOL boot orders, which are enabled in the next boot.
Order
See
Boot Other
Boot From File Boots up from a file that you specify.
Boot From Device Boots up from a device that you specify.
See
UEFI Shell Boots UEFI Shell.
Select Next One- Tries to boot from a specific target only on the next boot.
Time Boot
System
Boot Modes Displays a window to change boot modes.
See
Reset System Restart the system.
Tip: If the OS image cannot be found through the boot device or PXE server,
the server blade may reboot again and again.
Confirm the connection of boot device or PXE server in this case.
Add Boot Option sub menu
Select Generic Boot Option, and press Enter.
Note: You can only add Standard Boot Options.
Do not add Advanced Boot Options.
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Add Boot Option sub menu on page
Delete Boot Option sub menu on page
Change Boot Order sub menu on page
Add Boot Option sub menu on page
Delete Boot Option sub menu on page
Change Boot Order sub menu on page
Boot From Device sub menu on page 2-86
Boot Modes sub menu on page 2-87
UEFI setup menu
2-83.
2-84.
2-85.
2-83.
2-84.
2-85.
for details.
for details.
2-83