Tip: To uncheck, type the number of an unnecessary utility and press
Enter.
6
Type run and press Enter to execute the installation script.
.
7
The following message appears after the setting is complete. Type No
.
and press Enter because no reboot is required.
8
Since virtual drive setting with LSI Software RAID is complete, umount
.
Driver & Utility CD and remove the CD.
Virtual drive setting with Red Hat Enterprise Linux 5
This subsection describes how to set virtual drives on Red Hat Enterprise
Linux 5.
1
Restore the OS using the backup data, start the OS, and log on as root.
.
2
Insert Driver & Utility CD into the CD/DVD drive, and check Mapped on
.
the following Virtual Media Session window.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
6-55