Hitachi Compute Blade 500 Series User Manual page 425

2 The following subwindow appears in the middle of the Select Drive
.
Operations window. Select Drives Target ID: x: SATA, xxxx.xxxGB,
Rebuilding, a physical drive in Rebuild and press Enter.
3 The progress of Rebuild is shown in Operation Progress on Select Drive
.
Operation window. Repeat step 1 and step 2 as necessary and wait until
the item Operation Progress disappears.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
6-47