Hitachi Compute Blade 500 Series User Manual page 112

System Settings
Select an item to display or set, and press Enter.
Note: Do not change the settings of the following items. If you change the
settings, UEFI may not start up.
• Adapters and UEFI Drivers
• Devices and I/O Ports
• Legacy Support
• Network
• Storage
For details about Emulex 8 Gb FC mezzanine card or Emulex CNA mezzanine
card (Personality: FCoE/iSCSI), however, see the Hitachi Compute Blade
Emulex Adapter User's Guide for Hardware to set the following two items.
– Network
– Storage
For details about Hitachi Gigabit fibre channel adapter, however, see the
Hitachi Gigabit Fibre Channel Adapter USER'S GUIDE (BIOS/EFI Edition) to
set the following two items.
– Adapters and UEFI Drivers
– Storage
The following table shows description of menu items displayed in the left side
of the window.
Adaptors and UEFI Drivers Displays information about adapters and UEFI drivers on the
Devices and I/O Ports
Driver Health
Legacy Support
Memory
Network
1
Power
Processors
Recovery and RAS
Security
Storage
2-92
Table 2-82 System Settings menu items
Menu items
server blade.
Displays devices and I/O port options of settings.
Displays the driver status.
Displays the legacy support setting window.
Displays and provides option to change the memory settings.
See
Selects the Network setup options.
Selects the Power setup options.
Displays and provides option to change the processor
settings.
See
Displays the Recovery setting window.
See
Selects the TPM setup options.
See
Selects this option to see all the Storage Device options.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Memory sub menu on page
Processors sub menu on page
Recovery and RAS sub menu on page
Security sub menu on page
2-94.
2-98.
2-99.
2-100.