Main Menu - Hitachi Compute Blade 500 Series User Manual

Note: Unless otherwise specified, use the recommended values for all setting
items. If you set non-recommended values, the equipment would not be
supported and might not operate properly.

Main menu

Start MegaRAID WebBIOS, and the following main menu is displayed.
Click the target item that you want to set or display.
The following table shows description of menu items in the left side of
window.
Advanced Software Options Sets expansion functions.
Controller Selection
Controller Properties
Scan Devices
Virtual Drives
Drives
Configuration Wizard
Physical View
Events
Table 3-4 Main menu items
Menu items
Returns to the Controller Selection window.
1
Displays and sets the hardware information on the disk
array controller board.
Scans the installed devices.
Displays and sets the disk array (logical drive) information.
Displays and sets the disk (physical drive) information.
Configures or formats disk arrays.
Switches display modes.
Displays events.
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
Description
3-9