Boot Order Settings Using Uefi Menu - Hitachi Compute Blade 500 Series User Manual

5 Select Enabled of PXE Boot Support, and press Enter.
.
Press Enter several times to select Configure PXE VLAN ID/Priority.
Configure PXE VLAN ID/Priority is selected, and select Save, and
then press Enter.
6 Press ESC several times until the following text is displayed.
.
Then press Y to exit the PXE BIOS menu.

Boot Order settings using UEFI menu

Set the Boot Order using UEFI menu to perform PXE boot.
There are the following two types of Boot Order settings. Set the Boot Order
according to your usage.
• Primary Boot Order:
Power on a server blade using a power button or remote console menu,
or restart it by reboot.
• Secondary Boot Order:
Power on a server blade through Wake On LAN (WOL).
Tip:
• If the OS image cannot be found through the boot device or PXE server,
the server blade may reboot again and again.
Confirm the connection of boot device or PXE server in this case.
• If the deployment functionality for Hitachi Compute Systems Manager is
used, set both Primary Boot Order and Secondary Boot Order.
Follow the procedure to set the Boot Order.
1 Start the remote console, and then click Power > Power On to power on
.
a server blade.
2 The following is displayed on the window, and press F1.
.
8-4
BIOS settings for PXE boot
Hitachi Compute Blade 500 Series EFI User's Guide