Hitachi Compute Blade 500 Series User Manual page 325

Click ↓ key to show the following menu.
Apply Changes
Mirror Data Size
Logical Sector Size
Segment Size
Starting Logical Block
Addressing (LBA)
Protected
Bad Blocks
SSD Caching
Access
Current Write Cache
Policy
Default Write Cache
Policy
Disable Background
Initialization (BGI)
Read Cache Policy
Drive Cache
Input/Output (I/O)
Apply Changes
3 Select a menu item to set, and change the value.
.
Drive Management: Physical drive management menu
You can display physical drive information; execute tasks; assign and
unassign hotspare, and display hotspare setting information.
1 Select Drive Management on the Main Menu window, and press Enter.
.
2 Drive Management window appears. Select a virtual drive to check
.
information and press Enter.
3 The physical drive information is displayed.
.
Menu items
Applies settings.
Virtual drive size
Logical sector size
Access size of the virtual
drive
Starting address of the
virtual drive
Data protection
With or without Bad Blocks
SSD cache setting
Access to the virtual drive
Current Write Cache Policy
Default Write Cache Policy
Background Initialization
setting
Read Cache Policy
Write Cache Policy on the
physical drive
Read Cache operation setting Direct
Applies settings.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
View/Setting Value/View/Reference
-
-
512 B
64 KB
-
No
-
Disabled
Blocked / Read Only /
[<<Read/Write>>]
Write Through
Write Through
<<No (Background
Initialization Enabled)>> /
[Yes (Background
Initialization Disabled)]
No Read Ahead
[Disable] / Enable /
<<Unchanged>>
-
5-17