Hitachi Compute Blade 500 Series User Manual page 338
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (456 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
Virtual drives have been successfully created.
Then, initialize virtual drives referring to
5-34.
Adding virtual drives
You can add virtual drives following the steps below.
1
Select Create Virtual Drive - Advanced on the Configuration
.
Management window, and press Enter.
Note: Do not select Create Virtual Drive on the Configuration
Management window. If Create Virtual Drive is selected, you cannot
create virtual drives with correct setting values.
2
Create Virtual Drive - Advanced window appears.
.
3
Select Select Drives From and press Enter.
.
4
Select Free Capacity and press Enter.
.
5
Select Select Drive Groups and press Enter.
.
6
Select Drive Groups window appears.
.
7
Select a Drive Group to add virtual drives to and press Space.
.
5-30
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Initializing virtual drives on page
Hide quick links:
Advertisement
Table of Contents
