Creating Virtual Drives; Creating Raid 0 Or Raid 1 Virtual Drives - Hitachi Compute Blade 500 Series User Manual

Stop Patrol Read
Patrol Read Setting for
Unconfigured Space
Apply Changes
Note:
1
.
Note: When not using SAS 3004 iMR, select Ignore errors as Boot Error
Handling setting.
When using SAS 3004 iMR, select Pause on errors as Boot Error
Handling setting.
4 Select a menu item to set, and change the value.
.

Creating virtual drives

This section describes how to create virtual drives.

Creating RAID 0 or RAID 1 virtual drives

This subsection describes how to create RAID 0 or RAID 1 virtual drives.
1 Select Create Virtual Drive - Advanced on the Configuration
.
Management window, and press Enter.
Note: Do not select Create Virtual Drive on the Configuration
Management window. If Create Virtual Drive is selected, you cannot
create virtual drives with correct setting values.
2 Create Virtual Drive - Advanced window appears.
.
Menu items
1 Stops Patrol Read.
Patrol read setting for unused
physical drives
1
Applies the setting change.
Do not select this item which is not supported.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
View/description Value/view/reference
-
-
-
5-25