Hitachi Compute Blade 500 Series User Manual page 344

The following table shows an estimate time for Slow Initialization.
300 GB (SAS 2.5 HDD)
900 GB (SAS 2.5 HDD)
1.8 TB (SAS 2.5 HDD)
400 GB (SAS 2.5 SSD)
800 GB (SAS 2.5 SSD)
Note:
•
•
•
10 press Esc on the window displayed in step 9.
.
11 Virtual Drive Management window appears.
.
Select a virtual drive to check the progress, and press Enter.
12 Virtual drive information appears.
.
Check the item Progress has disappeared.
5-36
Physical drive capacity
Time required for initialization varies depending on the single disk
capacity regardless of the RAID level or disk array capacity.
Since Slow Initialization rewrites 0, zero, into physical drives one after
another, contents of physical drives have been rewritten if you stop
the initialization at some point.
Progress will not be updated on the state of this window, go on to
step 10.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Time required for Slow Initialization
about 40 minutes
about 110 minutes
About 220 minutes
about 20 minutes
About 40 minutes