Hitachi Compute Blade 500 Series User Manual page 142

Menu items
MOR Status
Refresh TPM Status
TPM Settings
TPM Device
TPM State
MOR State
TPM Force Clear
Note:
1 A value in double angle brackets, << >>, shows the default.
.
TPM device settings
Enable the status of Trusted Platform Module (TPM) device.
Use the following procedure for enabling the TPM Device.
1 Confirm that "TPM Physical Presence" value is <Asserted> in the System
.
Security sub menu.
2 Select <Disable> of "TPM Device", and press Enter. <Enable> is
.
displayed, and press Enter again.
3 "Success!!Reboot required to enable this change." is displayed.
.
4 "TPM State" menu is added in the System Security sub menu when "TPM
.
Device" value is <Enable>.
5 Select <Deactivate> of "TPM State", and press Enter. <Enable> is
.
displayed, and press Enter again.
TPM is activated after rebooting the server blade.
Date and Time
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
2-122
Selection
-
-
• Enable
• <<Disable>>
• Activate
• <<Deactivate>>
• Enable
• <<Disable>>
-
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
1
Description
Displays MOR (memory overwrite request)
status.
Refreshes the display of TPM status.
Enables or disables TPM Device.
Performs TPM Activation.
This item is only displayed when TPM
Device is Enable.
Enable or Disable MOR (memory overwrite
request).
Deletes the TPM data.