Change Controller Properties: Disk Array Controller Settings; Manage Virtual Drive Properties: Virtual Drive Information View - Hitachi Compute Blade 500 Series User Manual

Change Controller Properties: disk array controller settings

On this window, you can configure disk array controller hardware
configuration.
1 Select Controller Management from Configuration Options window, and
.
press Enter.
2 Controller Management window appears. Select Change Controller
.
Properties, and press Enter.
3 Controller Management > View Change Controller Properties menu
.
appears.
The following table shows description of items in the window.
Apply Changes
Set Boot Device
Rebuild Rate
Background Initialization
(BGI) Rate
Consistency Check Rate
Apply Changes

Manage Virtual Drive Properties: virtual drive information view

On this window, you can show the virtual drive information.
1 Select Virtual Drive Management from Configuration Options window,
.
and press Enter.
2 Virtual Drive Management window appears. Select Manage Virtual Drive
.
Properties, and press Enter.
3 Virtual Drive Management > Manage Virtual Drive Properties menu
.
appears. Select Select Virtual Drive, and press Enter.
Table 6-7 Change Controller Properties menu items
Menu items
Applies the setting change.
Uses as a boot drive.
Sets virtual drives.
Rebuild priority
Background initialization
priority
Consistency check priority
Applies the setting change.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
Description Reference
-
Changing boot priority in
virtual drives on page 6-40
0 to 100/[<<30>>]
0 to 100/[<<30>>]
0 to 100/[<<30>>]
-
6-9