12
You can confirm the LU at following window when iSCSI Boot device is
.
correctly set to iSCSI Target.
Data device setting
1
Select iSCSI Target Configuration in the Controller Configuration
.
setting menu and press Enter.
2
When the iSCSI Target Configuration setting menu is displayed, select
.
Add New iSCSI Target and press Enter.
3
When the Add/Ping iSCSI Target setting menu is displayed, enter
.
iSCSI Target IP Address of iSCSI Target device to be connected. After
that, select Save/Login and press Enter.
9-12
iSCSI settings
Hitachi Compute Blade 500 Series EFI User's Guide