Hitachi Compute Blade 500 Series User Manual page 489

4 When following is displayed, press Y.
.
Tip: Error message Login to portal xxx.xxx.xxx.xxx:xxx failed. is
displayed when iSCSI Target IP Address does not exist or when target
device is not connected correctly. Resetting of iSCSI Target device is
required.
5 Press F3 at following setting menu and change Add Target to Yes.
.
6 Confirm that Add Target is Yes. After that, select Add Selected iSCSI
.
Targets and press Enter.
7 Confirm that Connection Status is Connected. After that, select connected
.
iSCSI Target and press Enter.
Hitachi Compute Blade 500 Series EFI User's Guide
iSCSI settings
9-13