Hitachi Compute Blade 500 Series User Manual page 313

When an error message appears, follow the steps below.
Note: If your condition is one of the following, change Boot Error Handling
setting to Ignore Errors. See
on page 5-46
• To prevent error messages from appearing at the system boot
• The disk array controller is no longer used.
1 When an error message appears at the system boot, press Esc.
.
2 See
.
necessary measures.
Note: Boot procedure cannot proceed depending on the error message. See
Error messages at the system boot on page 5-53
procedure cannot proceed, and consult your reseller or call maintenance
personnel.
Booting with an error message
If you proceed with booting the utility with an error message on the window,
follow the steps below.
1 Press Enter when an error message is displayed.
.
2 When the following is displayed, type a character string such as failure or
.
trouble and then Press Enter.
Tip: If the Critical Message window does not appear, see
at the system boot on page 5-53
cannot proceed.
for details.
Error messages at the system boot on page 5-53
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Displaying error messages at the system boot
for errors by which boot
for errors by which boot procedure
to perform
Error messages
5-5