Tip:
•
•
7
When creating RAID 0 with two drives, select Drives Target ID: 1:
.
SATA (a drive in slot 1) SATA, xxxx.xxxx GB, Unconfigured Good (a
drive recognized as Unconfigured Good). Press the space key.
When creating a single drive configuraion, skip this step and jump to step
8.
6-22
Only Unconfigured Good physical drives can be selected.
To cancel a selected drive, select the drive and press the space key.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide