Hitachi Compute Blade 500 Series User Manual page 114

USB Configuration
In USB Configuration, you can change the USB settings.
Front Dongle USB Port #1
Front Dongle USB Port #2
Front USB3.0 Port
Note:
1 A value in double angle brackets, << >>, shows the default.
.
Memory sub menu
Select the item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
System Memory Details
Total Memory Size
Memory Voltage
Memory Mode
Memory Speed
DDR Voltage Level
Memory Power
Management
Socket Interleave
2-94
Menu items
Disable
<<Enable>>
Disable
<<Enable>>
Disable
<<Enable>>
Table 2-83 Memory menu items
Menu items
-
-
-
•
•
•
•
•
•
•
•
•
2
•
•
•
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
1
Selection
Enables or disables USB ports.
Enables or disables USB ports.
Enables or disables USB ports.
1
Selection
Displays the status of each system
memory.
See
page
Displays the total memory size.
Displays the memory operating
voltage.
Lockstep Selects a memory operating mode.
<<Independent>>
<<Auto>> Sets a maximum value on memory
clock frequency.
Force DDR3 1066
Force DDR3 1333
Force DDR3 1600
Auto Sets the memory operating
voltage.
<<Force to 1.50V>>
Disable Sets Memory Power Management.
<<Automatic>>
Non-NUMA Sets Memory Socket Interleave.
<<NUMA>>
Description
Description
System Memory Details on
2-95.