Hitachi Compute Blade 500 Series User Manual page 133

Menu items
Network
1
Power
Processors
Recovery and RAS
Security
Storage
Note:
1 If you change a setting of this item, the EFI might not start. Do not change any
.
setting.
Devices and I/O Ports sub menu
Select an item to display or set, and press Enter.
Note: You need to change the PCI 64-Bit Resource Allocation, MM Config
Base, PCI Express Native Control and USB Configuration setting when using
some OSs and applications. Do not change other items.
The following table shows description of menu items appeared in the left side
of the window. Select an item to display or set, and press Enter.
Table 2-101 Devices and I/O Ports menu items
Menu items
Active Video
PCI Express Native
Control
PCI 64-Bit Resource
Allocation
MM Config Base
Intel® VT for Directed
I/O (VT-d)
Enable / Disable Onboard
Device(s)
Hitachi Compute Blade 500 Series EFI User's Guide
Selects the Network setup options.
Selects the Power setup options.
Displays and provides option to change the processor
settings.
See Processors sub menu on page
Displays the Recovery setting window.
See Recovery and RAS sub menu on page
Selects the TPM setup options.
See Security sub menu on page
Selects this option to see all the Storage Device options.
1
Selection
• <<Onboard
Device>>
• Add-in Device
• Disable
• <<Enable>>
• Disable
• <<Enable>>
• 1GB
• 2GB
• <<3GB>>
• <<Enable>>
• Disable
-
UEFI setup menu
Description
2-118.
2-120.
2-121.
Description
Specifies the output destination of
video display.
Enable or disable the native control
of PCI Express features from OS.
Enables or disables 64-bit resource
allocation to PCI devices.
Sets the starting address of the PCI
Express configuration space.
Enables or disables Intel® VT for
Directed I/O (VT-d).
Enables or disables devices.
2-113