Drive Management: Physical Drive Management Menu - Hitachi Compute Blade 500 Series User Manual

2 Virtual Drive Management menu appears.
.
The following table shows description of items in the window.
Menu items
Create Configuration
Manage Virtual
Drive Properties
Select Virtual Drive
Operations
View Drive Group
Properties
Note:
• View Drive Group Properties is not supported. Do not use this item.
• Manage Virtual Drive Properties and Select Virtual Drive Operation
are available when a configured virtual drive exists

Drive Management: physical drive management menu

On this window, you can show physical drive information and execute tasks.
1 Select Drive Management from Configuration Options window, and
.
press Enter.
2 Drive Management menu appears.
.
The following table shows description of items in the window.
Menu items
View Drive Properties
Select Drive Operations Executes a task on the physical
View Global Hot Spare
Drives
Note: View Global Hot Spare Drives cannot be selected.
Table 6-4 Virtual drive management menu items
Creates virtual drives.
Displays virtual drive status
and setting information.
Executes a task on the
virtual drive.
Displays virtual drive
properties information.
Table 6-5 Drive management menu items
Displays physical drive status
and setting information.
drive.
Displays hotspare for the
physical drive.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Virtual drive configuration on
page 6-16
Manage Virtual Drive
Properties: virtual drive
information view on page 6-9
Consistency check on virtual
drives on page 6-42
-
Description
Reference
Reference
View Drive Properties:
physical drive information
view on page 6-12
Rebuilding virtual drives on
page 6-43
-
6-7