Hitachi Compute Blade 500 Series User Manual page 115

Menu items
2
Patrol Scrub
Memory Data
2
Scrambling
3
Mirroring
3
Sparing
Memory Deconfigure
Mode
Notes:
1 A value in double angle brackets, << >>, shows the default.
.
2 If you change a setting of this item, the EFI might not start. Do not change any
.
setting.
3 When Mirroring is enabled, you cannot set Sparing. Conversely, when Sparing is
.
enabled, you cannot set Mirroring.
System Memory Details
Place the cursor on a node to display, and press Enter. This menu appears
only in SMP configuration.
Hitachi Compute Blade 500 Series EFI User's Guide
1
Selection
• <<Enable>>
• Disable
• Disable
• <<Enable>>
• <<Disable>>
• Enable
• <<Disable>>
• Enable
UEFI setup menu
Description
Sets the patrol scrubbing which
proactively searches the memory
to repair correctable errors.
Sets the memory data scrambling.
Sets the memory mirroring.
Sets the memory sparing.
Memory which are plugged in can
be disabled by this menu.
Memories can be disabled/Enabled
per memory controller.
See Memory Deconfigure Mode
Details on page 2-97.
2-95