Hitachi Compute Blade 500 Series User Manual page 144

Menu items
Secondary (WOL) Boot Sequence
Add WOL Boot
Option
Delete WOL Boot
Option
Change WOL Boot
Order
Boot Other
Boot From File
Boot From Device
Select Next One-
Time Boot
System
Boot Modes
Reset System
Tip: If the OS image cannot be found through the boot device or PXE server,
the server blade may reboot again and again.
Confirm the connection of boot device or PXE server in this case.
Add Boot Option sub menu
Select Generic Boot Option, and press Enter.
Note: You can only add Standard Boot Options.
Do not add Advanced Boot Options.
Tip: To boot from a device not included in Boot Order, add it to Boot Option
for both Primary Boot Sequence and Secondary (WOL) Boot Sequence. Select
Add Boot Option in a category depending on your purpose.
Select an item to add, and press Enter.
2-124
Adds a device or file system to the WOL boot option.
See Add Boot Option sub menu on page
Deletes a device or file system from the WOL boot option, which
is enabled in the next boot.
See Delete Boot Option sub menu on page
Change the WOL boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page
Boots up from a specific device or file.
Boots up from a specific device path.
Tries to boot from a specific target only on the next boot.
Displays the window to change system boot modes.
Restart the system.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
2-124.
2-125.
2-126.