Hitachi Compute Blade 500 Series User Manual page 17

Table 1-2 Factory default account settings for the system
IP address of management module
URL of Web console
Tip:
• The above URL indicates the default IP address of management
module, and port number is not entered since using default number.
If you changed the IP address of management module, and the port
number of web console, enter the corresponding URL for your
environment.
• The URL is configured in the following form:
http://< IP address>:< port number> or
https://< IP address>:< port number>
• The default port number:
– http: 80
– https: 443
3 Login the Web console of the management module.
.
4 The following table describes the factory default account settings for the
.
system administrator.
Table 1-3 Factory default account settings for the system
Item
User ID
Password
5 Click the Resources tab > the target server blade from the menu tree.
.
Click the Condition tab > Start Remote Console from the Server blade
Action pull down menu.
UEFI and BIOS Configuration Overview
Hitachi Compute Blade 500 Series EFI User's Guide
administrator
Item
administrator
administrator
password
Factory default
192.168.0.1
https://192.168.0.1
Factory default
1-3