Hitachi Compute Blade 500 Series User Manual page 132

Processor Details
Memory
Memory Mode
Memory Speed
Total Memory Size
Memory Voltage
System Settings
Select an item to display or set, and press Enter.
Note: Do not change the settings of the following items. If you change the
settings, UEFI may not start up.
• Adapters and UEFI Drivers
• Devices and I/O Ports
• Legacy Support
• Network
• Storage
For Emulex 8 Gb FC mezzanine card or Emulex CNA mezzanine card
(Personality: FCoE/iSCSI), however, see the Hitachi Compute Blade Emulex
Adapter User's Guide for Hardware to set the following two items.
– Network
– Storage
For Hitachi Gigabit fibre channel adapter, however, see the Hitachi Gigabit
Fibre Channel Adapter USER'S GUIDE (BIOS/EFI Edition) to set the following
two items.
– Adapters and UEFI Drivers
– Storage
The following table shows description of menu items displayed in the left side
of the window.
Adaptors and UEFI Drivers Displays information about adapters and UEFI drivers on the
Devices and I/O Ports
Driver Health
Legacy Support
Memory
2-112
Menu items
Table 2-100 System Settings menu items
Menu items
server blade.
Displays devices and I/O port options of settings.
Displays the driver status.
Displays the legacy support setting window.
Displays and provides option to change the memory settings.
See
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Displays details of the installed processors.
Displays the memory mode.
Displays the installed memory speed.
Displays the total installed memory size.
Displays the memory operating voltage.
Description
Memory sub menu on page 2-114.