Hitachi Compute Blade 500 Series User Manual page 424

11 Rebuild starts up. Drive Management window appears after Rebuild is
.
complete.
12 Check the progress of Rebuild. Finish LSI Software RAID Configuration
.
Utility referring to
and check the progress of Rebuild with the RAID utility.
Note:
• See the MegaRAID Storage Manager Version xxx Instruction Manual in
flash memory embedded in the chassis and contained in Driver & Utility
CD respectively for how to find the progress of Rebuild with RAID utility.
See the Hitachi Compute Blade Series Hitachi Compute Rack Series OS
Installation Guide for Windows Server or Hitachi Compute Blade 500
Series OS Installation Guide for Red Hat Enterprise Linux in the flash
memory embedded in the server chassis for where they are.
• It takes hours for Rebuild to be completed with LSI Software RAID
Configuration Utility. It is recommended that you continue Rebuild on the
OS after ending LSI Software RAID Configuration Utility.
• See
of Rebuild with LSI Software RAID Configuration Utility.
• See
Software RAID Configuration Utility.
• See
LSI Software RAID Configuration Utility.
To check on the progress of Rebuild:
When checking on the progress of Rebuild with LSI Software RAID
Configuration Utility, follow the steps shown below.
1 Execute step 1, step 4, and step 5 shown in
.
page 6-43
Drive and press Enter.
6-46
Ending the utility on page
To check on the progress of Rebuild: on page 6-46
To stop Rebuild: on page 6-48
To re-execute Rebuild: on page 6-51
to show Select Drive Operations window. Then, select Select
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
6-15. Then, restart the OS
for stopping Rebuild with LSI
for re-executing Rebuild with
Rebuilding virtual drives on
for the progress