Hitachi Compute Blade 500 Series User Manual page 441

The following table shows description of items in the window.
Menu items
Adapter Displays the disk array controller name.
PCI Slot Displays a PCI slot number of the disk
array controller.
PCI Address (Bus/ Displays a PCI address of the disk array
Dev) controller.
Bus: bus number; Dev: device number
MPT Firmware Displays a firmware revision of the disk
Revision array controller.
Package Revision Displays a package revision of the disk
array controller.
SAS Address Displays a SAS address of the disk array
controller.
NVDATA Revision Displays an NVDATA revision of the disk
array controller.
Status Displays status of the disk array
controller.
Boot order Displays the boot order.
Boot Support Sets where to boot: from the
management BIOS of the disk array
controller or the OS.
Note:
1 When booting OS through LSI SAS 2004: Enabled BIOS & OS
.
When booting OS through LSI SAS 2208: Disabled
Hitachi Compute Blade 500 Series EFI User's Guide
Table 7-2 Basic information items
Description
SAS configuration utility
Setting/display value
Unchangeable
Unchangeable
Unchangeable
Unchangeable
Unchangeable
Unchangeable
Unchangeable
Unchangeable
Unchangeable
<<Enabled BIOS &
OS>>/Disabled/Enabled
BIOS only/Enabled OS
1
only
7-7