Hitachi Compute Blade 500 Series User Manual page 162

The following table shows description of menu items in the window.
Menu items
Battery Backup
Set Factory Defaults
Cluster Mode
Rebuild Rate
BGI Rate
CC Rate
Reconstruction Rate
3
NCQ
Coercion Mode
S.M.A.R.T Polling
3-12
Table 3-6 Controller properties submenu 1 items
Status of battery backup unit
installation
2 Returning all the settings to their
defaults values
3 Setting the cluster mode
Priority of rebuilding
3
3 Priority of background initializing 0 to 100 / [<<30>>]
Priority of consistency check
3
Priority of capacity expansion
3
Enabling or disabling the NCQ
command
1 Setting the capacity control for
the physical disk used for disk
array building
Setting the interval of S.M.A.R.T.
4
reporting
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
Description Setting/display value
None
Unchangeable
[<<Disabled (invalid)>>]
0 to 100 / [<<30>>]
0 to 100 / [<<30>>]
0 to 100 / [<<30>>]
[<<Enabled (valid)>>] /
Disabled (invalid)
[<<None (using the entire
capacity)>>] / 128MB-way
(using a capacity as a multiple
of 128MB) / 1GB-way (using a
capacity as a multiple of 1GB)
0 to 65535 / <<300>> / [600]