Hitachi Compute Blade 500 Series User Manual page 155
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (456 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
2
When the following window is displayed, confirm that the underlined disk
.
array controller is "MegaRAID SAS MR9240-8i", and then press Ctrl + H
keys.
When the OS has started before pressing the key, shut down the OS and
restart the server blade. See the documents attached to your OS for
shutting down.
Tip: When the storage expansion blade has multiple disk array
controllers, the following window is displayed.
When press Ctrl + H keys in the above window that the underlined disk
array controller is "MegaRAID SAS 9240-8i", MegaRAID WebBIOS that
correspond to the storage expansion blade is started.
If you start MegaRAID WebBIOS incorrectly, exit MegaRAID WebBIOS,
and then restart the system unit.
3
The MegaRAID WebBIOS is started and Adapter Selection is displayed.
.
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
3-5
Hide quick links:
Advertisement
Table of Contents
