Hitachi Compute Blade 500 Series User Manual page 457

Creating RAID 0
This section describes the procedure for creating a RAID 0 disk array.
1 Select Create RAID 0 Volume on the Select New Volume Type
.
window, and press Enter key.
2 Create New Volume window is displayed.
.
Note: Do not use other key functions unless instructed otherwise.
Tip: For details of the above window, see
Select No, the intersection of the Slot Num 0 line and the RAID Disk
column, and press space key to change No to Yes.
Hitachi Compute Blade 500 Series EFI User's Guide
SAS configuration utility
Creating RAID 1 on page 7-17.
7-23