Hitachi Compute Blade 500 Series User Manual page 32

RAS Configuration sub menu
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select the item to display or set, and press Enter.
Menu items
Deconfigured Mode •
Note:
1 A value in double angle brackets, << >>, shows the default.
.
Date and Time
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Menu items
System Date Increases or decreases the
System Time Increases or decreases the
Start Options
Select an item to boot, and press Enter.
Place the cursor on a device to boot, and press Enter. The selected device
will be booted first.
The items to be displayed may be different depending on the setting of Boot
Manager.
For the details, see
Note: When you boot from CD/DVD available in both UEFI mode and Legacy
mode, the boot may be performed in UEFI mode. To boot in Legacy mode,
follow the procedure described in
2-12
Table 2-10 RAS Configuration menu items
1
Selection
<<Enable>>
• Disable
Table 2-11 Data and Time menu items
Selection
setting value using [+], [-]
keys.
setting value using [+], [-]
keys.
Boot Manager on page
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Enable or Disable CPU and DIMM Deconfigured
Mode.
Description
Sets the local date of the system. Sets the
date as mm/dd/yyyy.
Sets the local time of the system. Sets the
time as hh:mm:ss in the form of 24 hours.
2-13.
Boot From Device sub menu on page 2-16.