Hitachi Compute Blade 500 Series User Manual page 61

QPI Link Speed
Processor Details
Memory
Memory Mode
Memory Speed
Total Memory Size
Memory Voltage
System Settings
Select an item to display or set, and press Enter.
Note: Do not change the settings of the following items. If you change the
settings, UEFI may not start up.
• Legacy Support
• Power
For details about Emulex 8 Gb FC mezzanine card or Emulex CNA mezzanine
card (Personality: FCoE / iSCSI), however, see the Hitachi Compute Blade
Emulex Adapter User's Guide for Hardware to set the following two items.
• Network
• Storage
For details about Hitachi Gigabit fibre channel adapter, however, see the
Hitachi Gigabit Fibre Channel Adapter USER'S GUIDE (BIOS/EFI Edition) to
set the following two items.
• Adapters and UEFI Drivers
• Storage
The following table shows description of menu items displayed in the left side
of the window.
Menu items
Adaptors and UEFI
Drivers
Devices and I/O
Ports
Driver Health
Legacy Support
Memory
Menu items
Displays the QPI link speed.
Displays details of the installed processors.
Displays the memory mode.
Displays the installed memory speed.
Displays the total installed memory size.
Displays the memory operating voltage.
Table 2-36 System Settings menu items
Displays information about adapters and UEFI drivers on the
server blade.
Displays devices and I/O port options of settings.
See Devices and I/O Ports sub menu on page
Displays the driver status.
Displays the legacy support setting window.
Displays and provides option to change the memory settings.
See Memory sub menu on page
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Description
2-42.
2-43.
2-41