Hitachi Compute Blade 500 Series User Manual page 82

Menu items
Rank Margining Test
Note:
1 A value in double angle brackets, << >>, shows the default.
.
System Memory Details
Select a processor to display and press Enter. Then, details of memory
connected to the processor are displayed.
Tip: EMPTY: DIMM is not installed in the DIMM slot.
Present, Enabled: DIMM is available.
System Security sub menu
Select an item to display or set on Trusted Platform Module (TPM 1.2), and
press Enter.
Note: Do not change the settings of the following item. If you change the
settings in a poor attempt, UEFI may not start up.
• TXT State
The following table shows description of menu items appeared in the left side
of the window.
Select the item to display or set, and press Enter.
2-62
Selection
• <<Disable>>
• Enable
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
1
Description
Sets the memory rank margin test.