View Drive Properties: Physical Drive Information View - Hitachi Compute Blade 500 Series User Manual

Menu items
Apply Changes
Note: View Associated Drives is not supported. Do not use the item.
To configure virtual drive:
Follow steps shown below to give any name to a virtual drive.
1 Select Virtual Drive Management > Manage Virtual Drive
.
Properties > Virtual Drive Name and press Enter.
2 The following subwindow appears in the middle of the window. Type a
.
virtual drive name with up to 15 characters and press Enter.
3 Select Virtual Drive Management > Manage Virtual Drive
.
Properties > Apply Changes and press Enter.
4 Virtual Drive Management > Manage Virtual Drive Properties > Success
.
message appears. Select OK and press Enter.
5 The window returns to Virtual Drive Management.
.

View Drive Properties: physical drive information view

This section shows physical drive information.
1 Select Drive Management from Configuration Options window and press
.
Enter.
2 Drive Management window appears. Select View Drive Properties and
.
press Enter.
3 View Drive Properties menu appears. Select Select Drive and press
.
Enter.
6-12
Applies the setting change.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Setting value/
view/reference
-