Hitachi Compute Blade 500 Series User Manual page 140

Recovery and RAS sub menu
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Place the cursor on a menu to set, and press Enter.
Advanced RAS
Backup Bank Management -
Disk GPT Recovery
System Recovery
Advanced RAS
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Select the item to display or set, and press Enter.
Machine Check Recovery
PCI Live Error Recovery
PCIe Isolation
Hardware Memory Dump
Dump Partition
Post Process
Deconfigured Mode
2-120
Table 2-105 Recovery and RAS sub menu items
Menu items Selection
-
-
-
Table 2-106 RAS Configuration menu items
Menu items
•
•
•
•
•
2
•
•
2
•
2 No Present
•
2
•
•
•
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Sets the failure deconfiguration to CPU and
DIMM.
See Advanced RAS for details.
Sets the backup management.
Set the disk GPT recovery
Sets the system recovery.
1
Selection
Disable Enable or Disable Machine Check
Recovery.
<<Enable>>
<<Disable>> Enable or Disable PCI Live Error
Recovery.
Enable
<<Disable>> Enable or Disable PCIe Isolation.
Enable
<<Disable>> Enable or Disable Hardware Memory
Dump.
Enable
Shows Dump Partition.
<<Spinloop>> Sets Post Process.
Reset
<<Disable>> Enable or Disable DIMM Deconfigured
Mode.
Enable
Description
Description