Hitachi Compute Blade 500 Series User Manual page 228

Menu items
Maintain PD Fail
History
Stop On Error
Controller BIOS
Disc Activity
Link Speed
Global Hot spare for
Emergency
Unconfigured for
Emergency
Notes:
1 Do not set this item, which is not supported.
.
2 Make sure to use this item with the default setting.
.
3 When LSI SAS 2008 is installed in the half-wide blade, you must disable Controller
.
BIOS for LSI
SAS 2208 and confirm that Controller BIOS for LSI SAS 2008 is enabled. For details,
see
4 When booting OS through LSI SAS 2004 in half-wide blade, you must disable
.
Controller BIOS for LSI SAS 2208 and confirm that Boot Support of LSI SAS 2004 is
"Enabled BIOS & OS".
When booting OS through LSI SAS 2208 in storage expansion blade, you must
disable Boot Support for LSI SAS 2004 in half-wide blade and confirm that Controller
BIOS for LSI SAS 2208 is enabled.
4-18
Sets whether or not a failed
hard disk can be used.
1
Sets whether or not to boot
2
the OS when an error is
detected at the consistency
check.
3 Sets the disk array
controller BIOS
Sets hard disk LED
1
switching.
Sets the physical drive link
speed.
Sets whether or not to
rebuild a different type of
1
physical drive for global hot
spare.
Sets whether or not to
1 rebuild an unconfigured
physical drive.
Controller properties submenu 2 on page
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
Description
page: schedule consistency check
setting submenu on page
[<<Enabled (Registers failed hard
disk information.)>>] /
Disabled (Not register failed hard
disk information.)
[<<Disabled>>] / Enabled
Not mounting the LSI SAS 2008
RAID mezzanine card and LSI
SAS 2004:
[<<Enabled>>] / Disabled
Mounting together with LSI SAS
2008 RAID mezzanine card or LSI
SAS 2004:
[<<Disabled>>] / Enabled
[<<Disabled>>] / Enabled
Click Manage to go to Link
Speed:
submenu on page
[<<Disabled>>] / Enabled
[<<Disabled>>] / Enabled
3-13.
Setting/display value
3-15.
Link Speed: Link Speed
4-20.