Disable Software Raid - Hitachi Compute Blade 500 Series User Manual
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (456 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
10
Select Exit Setup, and press Enter.
.
11
Press Y key to exit Setup Utility.
.
Storage expantion blade settings is completed.
Disable Software RAID
When adding an expansion card at configuration supporting Software RAID,
you can execute SAN boot. If so, you need to disable Software RAID
manually.
This subsection describes how to disable Software RAID.
1
When <F1> Setup is shown on the bottom of the window during server
.
blade startup, press F1 key.
2
Select System Settings and press Enter.
.
3
When System Settings menu appears, select Devices and I/O Ports
.
and press Enter.
4
When Devices and I/O Ports menu appears, select Enable / Disable
.
Onboard Device(s) and press Enter.
5
When Enable / Disable Onboard Device(s) menu appears, select SCU
.
Controller and press Enter.
6
Select Disable and press Enter.
.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
2-73
Hide quick links:
Advertisement
Table of Contents
