Hitachi Compute Blade 500 Series User Manual page 88

Tip: You can change WOL Boot Order in Change WOL Boot Order menu in
the same way.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Menu items
Change the
order
Commit Changes Commits changes. You need to save the new settings before exiting
Note: Legacy Only is a flag to indicate booting from target devices displayed
below in Legacy mode, not to indicate target devices to boot. For CB 520A
A1, we guarantee OS boot only in Legacy mode. Thus, place Legacy Only at
the top of the Boot Order.
Boot From Device sub menu
Select a device to boot, and press Enter.
Check Legacy Only to start booting the OS in Legacy mode from the selected
device.
2-68
Table 2-60 Change Boot Order menu items
Displays bootable devices currently available in the boot attempt
order. To change orders, select and highlight a device with up/down
cursor keys, change the order with [+]/[-] keys, and press Enter.
from the setup menu
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description