Iscsi Controller Setting - Hitachi Compute Blade 500 Series User Manual

iSCSI Controller setting

Select the controller and modify the settings.
1 Select Controller Configuration by Tab in the iSCSI Initiator
.
Configuration setting menu and press Enter.
2 When the Controller Selection Menu setting menu is displayed, select
.
controller name to be modified and press Enter.
Tip:
•
•
3 The Controller Configuration setting menu is displayed. iSCSI Initiator
.
and Target are set by selecting options from this menu. When the
Controller Configuration setting menu is displayed, select Controller
Properties and press Enter.
4 When the Controller Properties setting menu is displayed, confirm that
.
Boot Support is Enabled. After that, select Save by Tab and press
Enter.
All the name of available controllers are displayed on setting menu.
The location of the controller (Bus/Dev) is variable with the I/O
devices on the server blade. Confirm the I/O devices on the server
blade to select the controller.
iSCSI settings
Hitachi Compute Blade 500 Series EFI User's Guide
9-7