Uefi Setup Menu Items (Cb 520A A1); System Configuration And Boot Management - Hitachi Compute Blade 500 Series User Manual

Tip: If you have unsaved changes, <Y> Save And Exit the Setup Utility is
appeared. And then press Y to save changed settings and exit.

UEFI setup menu items (CB 520A A1)

This section describes UEFI setup menu items for CB 520A A1.

System Configuration and Boot Management

Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Table 2-49 System Configuration and Boot mManagement menu items
Menu items
System Information
System Settings
Data and Time
Start Options
Boot Manager
System Event Logs
User Security
Save Settings
Restore Settings
Load Default Settings Returns settings to the default values.
Exit Setup
System Information
Select an item to display or set, and press Enter.
Displays the basic system information, which cannot be changed.
Displays the system settings.
Sets the local date and time of the system.
Executes boot from a device selected on Boot Option, Primary
Boot Sequence, Boot Manager.
Displays the boot priority order; adds, deletes a boot device;
changes the boot order; sets boot from a file, one-time boot; or
resets the system.
Displays the system event logs display menu.
Sets/changes power-on and administrative passwords.
Saves the new settings.
Discards any changes you made and restore to the original
settings.
Exits the Setup menu.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
2-57