Hitachi Compute Blade 500 Series User Manual page 413

The following table shows an estimate time for Full Initialization.
Physical drive capacity
SATA HDD 500 GB
SATA HDD 1TB
Note: Since Full Initialization rewrites 0, zero, into physical drives one
after another, contents of physical drives have been rewritten if you stop
Full Initialization at some point. When you need to stop initialization,
follow the steps shown in
14 When restoring the OS with ServerConductor/Deployment Manager after
.
configuring and initializing a virtual drive, execute
on page 6-53.
To stop initialization
This subsection describes how to stop initialization.
1 Execute step 1 and step 2 shown in
.
6-31 to show Select Virtual Drive Operations window. Then, select Select
Virtual Drive and press Enter.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
Time required for Full Initialization
170 hours
340 hours
To stop initialization on page
Full initialization procedure on page
6-35.
Setting virtual drives
6-35