Viewing And Setting Information About The Utility; Window Configuration Of The Utility; Main Menu - Hitachi Compute Blade 500 Series User Manual

Viewing and setting information about the utility

This section describes setting items and values and displayed items of LSI
MegaRAID HITACHI SAS 3004 iMR ROMB Configuration Utility.
• In the table for each menu, default values are enclosed in << >>.
• In the table for each menu, recommended values are enclosed in [ ].
Example:
[<<Enable (valid)>>]/Disable (invalid): Enable is the default and also
recommended value.
[Enable (valid)]/<<Disable (invalid)>>: Disable is the default value; and
Enable is the recommended value, which requires the change.
Note: Unless otherwise specified, use the recommended values for all setting
items. If you set non-recommended values, the system unit would not be
supported and might not operate properly.
When a setting window continues to the next, the downward arrow in red [↓]
is shown on the window.

Window configuration of the utility

This section describes window configuration of the LSI MegaRAID HITACHI
SAS 3004 iMR ROMB Configuration Utility.

Main Menu

Start LSI MegaRAID HITACHI SAS 3004 iMR ROMB Configuration Utility, and
the following Main Menu is displayed.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
5-9