Hitachi Compute Blade 500 Series User Manual page 222

Tip: Do not use Advanced Software Options and Events because they are
not supported.
Controller properties: menu for setting the disk array controller board
You can review the hardware information about the disk array controller
board.
Click Controller Properties from the main menu. The following Controller
Information window is displayed.
If you want to change the setting, click Next.
The following table shows description of menu items in the window.
Serial Number
FRU
SubVendorID
Drive Security Capable
SubDeviceID
PortCount
HostInterface
NVRAM Size
Firmware Version
4-12
Table 4-5 Controller properties menu items
Menu items
Serial number
Board names for maintenance
Sub-vendor ID
Physical drive security capability: Yes or No
Sub-device ID
Number of installed ports
Host interface
Size of installed NVRAM
Firmware version
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
Description